If the table surface is not 90 degrees to the disc, loosen the table lock knob A Fig. Page Wrench Storage A Fig. Connect the electrical power to the sander. Hold the workpiece firmly and keep your fingers away from the sanding belt. Page 18 Fig. Move the work from the center to the left side of the sanding disc. Always sand on the left downward side of the sanding disc. Sanding on the right upward side of the sanding disc could cause the workpiece to fly up, which could be hazardous.
All plastic parts should be cleaned with a soft damp cloth. NEVER use solvents to clean plastic parts. They could possibly dissolve or otherwise damage the material. Page Parts, Service Or Warranty Assistance Two Year Limited New Product Warranty Delta will repair or replace, at its expense and at its option, any new Delta machine, machine part, or machine accessory which in normal use has proven to be defective in workmanship or material, provided that the customer returns the product prepaid to a Delta factory service center or authorized service station with proof of purchase of the product within two years and provides Delta with reasonable opportunity to verify the alleged defect by inspection.
Print page 1 Print document 22 pages. As with all machinery, there are certain hazards involved with the operation of the product.
Using the machine with respect and caution will considerably lessen the possibility of personal injury. However, if normal safety precautions are overlooked or ignored, personal injury to the operator may result.
Safety equipment such as guards, push sticks, hold-downs, featherboards, goggles, dust masks and hearing protection can reduce your potential for injury.
Always use common sense and exercise caution in the workshop. Figure out an alternative procedure that feels safer. This machine was designed for certain applications only.
If you have any questions relative to a particular application, DO NOT use the machine until you have first contacted Delta to determine if it can or should be performed on the product. Wear safety glasses. Everyday eyeglasses only have impact resistant lenses; they are not safety glasses.
Also use face or dust mask if cutting operation is dusty. Form habit of checking to see that keys and adjusting wrenches. Cluttered areas and benches invite accidents. Keep work area well-lighted. All children and visitors should be kept a safe distance from work area. It will do the job better and be safer at the rate for which it was designed.
No loose clothing, gloves, neckties, rings, bracelets, or other jewelry to get caught in moving parts. Nonslip footwear is recommended. Wear protective hair covering to contain long hair. Use clamps or a vise to hold work when practical. Keep proper footing and balance at all times. Keep tools sharp and clean for best and safest performance.
Follow instructions for lubricating and changing accessories. The use of accessories and attachments not recommended by Delta may cause hazards or risk of injury to persons. Serious injury could occur if the tool is tipped or if the cutting tool is accidentally contacted.
Before further use of the tool, a guard or other part that is damaged should be carefully checked to ensure that it will operate properly and perform its intended function — check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced. Feed work into a blade or cutter against the direction of rotation of the blade or cutter only.
A moment of inattention while operating power tools may result in serious personal injury. Always operate machinery in well ventilated areas and provide for proper dust removal. Use wood dust collection systems whenever possible.
Model Number Recommended. Submit your question. Thank you for your question! Our experts will get back to you as soon as they can. Ask Another Question. Continue Shopping. Discussion is closed. Question: Replacement Belt sogsace. Is there another belt number for these, since this part number is discontinued? Hello sogsace, If you still have the old belt, and can read any numbers on it.
It may have an XL on it. Google that part number and you might be able to locate one. Hello , Unfortunately the A relay has been discontinued by the manufacture and they did not replace it with any other part. You may try to take it to a electronics supplier in your area to see if he has some kind of substitution you can use. Good luck, -WJA. I used a 2 wire ac compressor hard start kit. This will replace the relay and the capacitor. It will be a little bit of fun to get everything into the electrical compartment.
I am using the MPR1 like suggested. I understand hooking one side of the MPR1 to the red motor wire, but what about the other black wire from the motor? For Parts, Service, Warranty or other Assistance,. Previous Page. Next Page. Delta Model Instruction Manual 22 pages. Related Manuals for Delta Sander Delta Instruction Manual 12" disc sander with integral dust collection 13 pages.
Sander Delta Instruction Manual Oscillating edge sander 25 pages. For Parts, Service, Warranty or other Assistance, Page 2: General Safety Rules If you have any questions relative to a particular application, DO NOT use the machine until you have first contacted Delta to determine if it can or should be performed on the product.
Page 4: Power Connections A separate electrical circuit should be used for your machines. This circuit should not be less than 12 wire and should be protected with a 20 Amp time lag fuse.
0コメント